CMC-ATEX Anlage für die Herstellung von hydroalkoholischem Gel

Hydrocolloid compounds are usually available in dry powder form, which must be diluted in water to obtain the desired colloidal solution.
When these powders come into contact with water, lumps quickly form and it is difficult to obtain a homogeneous mixture using a conventional agitator. To overcome this problem, this mixing unit incorporates a rotor-stator mixer at the bottom of the tank that shears the product, thereby increasing the water-additive contact area.
A cowles-type agitator fitted in the tank allows efficient circulation of the powder to the mixer lower head and also helps improve the dispersion time.
A product can become very viscous when the process requires using high concentrations of gelling agents, so using an additional anchor type agitator to ensure a completely mixed product may be necessary.
With its standard configuration, this equipment is set up to work with products up to 5000 cP. The configuration can be adapted accordingly for use with more viscous products.

AISI 316L stainless steel closed vertical unit.
Vertical agitator with cowles propeller.
Tank bottom high-shear mixer.
Maximum and minimum level probe.
Manhole for powder adding and inspection.
CIP spray balls.
Manual butterfly valves for discharge.
A control panel for installation in a non-classified zone.

Parts in contact with the product AISI 316L
Other materials AISI 304L
Gaskets in contact with the product EPDM

Surface finish:
Internal 2B, with removed and polished welds Ra ≤ 0.8 µm
External 2B, with brushed, washed and passivated welds

Product discharge pump.
Skid-mounted discharge pump.
Pump protection level.
Jacketed and insulated tank.
Anchor-type agitator or other agitation element according to client’s requirements.
Y-filter at the pump outlet.
A sampling valve in the tank body.
Load cells.
Other options on request based on customer-specific requirements.